Video Wall

Video Wall allows users to remotely control Symphony Client. To configure a video wall, click Server > Video Wall.

 

Perform the following steps from the Client PC(s) that are to be configured as video wall controllers:

 

  1. Install Symphony Client

  2. Open Symphony Client and click Server > Video Wall.

  3. Click Register current Symphony Client as controller (this will register the client's IP address into the server database)

  4. Make sure that port 50005 is open on the Client PC, so other Client PCs can interact remotely

 

Configure Video Wall

 

  1. Open Symphony Client and click Server > Video Wall.

  2. Click File > Design Video Wall to configure video wall layout and monitor orientation

  3. Click Video Wall Monitor and drag it to the wall. Repeat as necessary so each physical monitor connected to the controller(s) is shown on the wall

  4. Click File > Save to save layout

 

Using Video Wall

 

  1. Open Symphony Client and click Server > Video Wall.

  2. On the Video Wall tab, highlight the monitor and select the camera layout from the Number of Camera Views combo box

  3. Drag and drop cameras into the monitor